Enerpac News

All-new Enerpac cordless hydraulic pumps combine powered pump performance with hand pump portability

08.02.2013 - The new XC-Series cordless powered pumps introduced by Enerpac to the Australasian market provide a portable and cost-effective solution for remote locations.

Enerpac’s Xvari air-over-hydraulic pump specified to carry out container repairs safely

30.08.2012 - The 700 bar Xvari air-over-hydraulic pump has been specified by Enerpac to carry out repairs on damaged shipping containers safely and quickly.

New Enerpac electric tensioner pumps give remote controlled hassle-free operation

31.07.2012 - Enerpac has introduced a new range of electric tensioner pumps in Australasia, designed for safe and quick bolting and hydraulic nut actuation in demanding applications.

Think Safety: The dos and don’ts of hydraulics

30.07.2012 - High pressure hydraulic tools specialist, Enerpac advises users of hydraulic equipment to follow the proper rules of operation to avoid dangerous mistakes.

Enerpac’s ergonomic torque wrench enhances workplace safety and efficiency at Star project

27.07.2012 - An S series torque wrench from the Enerpac Professional Bolting Range is ensuring safety and efficiency during the construction of a new entertainment facility on top of the Star Casino in Sydney.

Enerpac’s hydraulic lift gantries curtail risk with cost-efficient technology

26.07.2012 - Hydraulic gantry systems from Enerpac are designed to lift and position heavy loads safely and efficiently in applications where traditional cranes cannot be used.

Enerlauncher hydraulic bridge launching system safely puts bridge sections in place

25.07.2012 - Enerpac presents the Enerlauncher hydraulic bridge launching system that employs PLC control to safely and precisely lift, push and steer huge bridge sections into place.

Enerpac dozer lift system synchronously and safely hoists D10 and D11 dozers weighing over 100,000kg

24.07.2012 - The new DLS Series dozer lift system from Enerpac can safely hoist dozers weighing above 100,000kg.

Enerpac synchronised hydraulic lifting system re-levels large 3-storey building in Christchurch

23.07.2012 - Enerpac supplied a synchronised hydraulic lifting system along with a battery of 50- and 100-ton jacks to assist with the re-levelling of a 3-storey building in Christchurch.

Enerpac introduces SyncHoist hydraulic load hoisting and positioning system to enhance crane precision and safety

11.05.2012 - High pressure hydraulic products specialist, Enerpac has introduced a new high precision hydraulic load hoisting and positioning system to Australasia.

High capacity POW’R RISER lifting jacks handle on-site and remote heavy lifting

03.05.2012 - Enerpac presents the easily manoeuvrable and self-contained POW’R RISER lifting jacks designed for heavy-duty lifting in space-constrained locations and on rough terrain.

Tough new Enerpac W22000 steel torque wrenches set top standards of safety and reliability

02.03.2012 - Enerpac has added the low profile W22000 steel hydraulic torque wrenches to its comprehensive range of non-impact professional bolting technologies.

New Enerpac ULTIMA Series hand pumps increase productivity and safety with minimal operator fatigue

01.03.2012 - Enerpac introduces the new ULTIMA series of steel hand pumps, designed for easier and safer operation as well as extended life.

Enerpac QuickFace FF mechanical flange face tools solve smaller flange refacing challenges

29.02.2012 - Enerpac presents the QuickFace FF mechanical flange face tools designed for refacing smaller pipe flanges at processing and pipeline-intensive industries, especially in awkward or hazardous locations.

New compact Enerpac torque wrench pumps deliver faster per bolt productivity gains

28.02.2012 - Enerpac has introduced a new compact range of hydraulic torque wrench pumps designed for use in demanding environments.

Enerpac Uni-Lift mechanical actuators set high standards of precision positioning

08.09.2011 - Enerpac will introduce its latest Uni-Lift mechanical actuators in capacities up to 250 tons at this year’s AIMEX exhibition.

Purpose-built Enerpac ZU4 hydraulic pumps deliver better ergonomics and pre and post-stressing performance

07.09.2011 - Enerpac presents their ZU4 hydraulic pumps engineered specifically for pre and post-stressing performance with fewer moving parts and generating less friction than conventional pumps to deliver more p

Enerpac’s safety and maintenance programmes for hydraulic tools reduce risk and downtime

06.09.2011 - Enerpac has launched a series of safety audits, correct maintenance programmes and staff training programmes for their high force hydraulic tools to minimise risk and downtime.

Compact high-pressure Enerpac hydraulic cylinders used to lower roof on Newcastle’s new Rugby League stadium

05.09.2011 - Compact high-pressure Enerpac hydraulic cylinders driven by some of Australia’s most advanced electric pumps were employed recently to carefully position the roof of the new $81 million Western Grands

Enerpac’s versatile lifting bags enable safe and simple rock clearance after Christchurch earthquake

02.09.2011 - A versatile lifting bag from Enerpac was used to shift heavy rocks during clean-up and reconstruction after the Christchurch earthquake.

New Enerpac Global Mining Manager focuses on productivity, safety and cost savings

01.09.2011 - Mr Anders Mangen has joined the world-leading specialist in extreme force tools, Enerpac as Global Mining Market Manager to further strengthen the company’s focus in the mining industry.

Enerpac hydraulic tools employed to streamline time and labour-saving flooring clamps manufacture

31.08.2011 - Enerpac 700 bar hydraulic tools were employed by a Melbourne-based metal engineering company to streamline the manufacture of a time and labour-saving range of flooring clamps.

Extreme performance Enerpac GT-Series hydraulic bolt tensioners offer faster, safer precision bolting

30.08.2011 - Enerpac supplies a range of extreme performance hydraulic bolt tensioners that facilitates faster, safer and more precise maintenance and fabrication operations.

Advances in Enerpac bolting technologies remove project safety risks

29.08.2011 - Enerpac emphasises that operations such as correct joint assembly, controlled bolt tensioning and tightening, and safe separation when decommissioning or separating joints for maintenance require trai

Enerpac Recommends Electric Pumps as Power Source for Portable Hydraulic Tools

10.02.2011 - Powerful and portable hydraulic tools are increasingly replacing backbreaking and often hazardous manual labour for various jobs.

Enerpac TSP Pro Series Swivels Resolve Access Problems for 700 Bar Torque Wrenches

09.02.2011 - Enerpac supplies a range of swivels designed to overcome access problems faced by torque wrenches in low profile bolting applications in industry.

Low Profile Enerpac Torque Wrenches Overcome Limited Access on ANSI Pipe Flanges

08.02.2011 - Low profile torque wrenches from Enerpac are ideal for controlled bolting applications in various industries.

Increase Productivity with Next Generation Enerpac RC Duo General Purpose Cylinders

07.02.2011 - Enerpac introduces the RC-Series Duo cylinders, one of the world’s most widely used compact, powerful and ruggedly versatile high-pressure cylinder ranges.

Enerpac Torque Wrenches Provide Robust Compact Bolting for Wind Towers

03.02.2011 - Enerpac offers a range of high-pressure torque wrenches to ensure precise application of torque while tightening bolts that connect wind tower segments.

Enerpac POW’R-RISER Lifting Jacks are Ideal for Heavy Duty Onsite Applications

14.01.2011 - Enerpac, a major supplier of high-pressure (700 bar) hydraulic equipment offers POW’R-RISER lifting jacks designed for heavy duty lifting applications onsite.

Enerpac hydraulic equipment streamlines Sydney’s M5 tunnel testing

17.12.2009 - A major bolt-testing program in Sydney’s M5 tunnel has been streamlined by the use of portable Enerpac hydraulic equipment that speeded up and simplified the testing process.

Offshore wind turbines plumb thanks to Enerpac’s Synchronous Lifting System

08.12.2009 - Enerpac's Synchronous Lifting System is used to level this supporting cross piece on some prominent offshore wind turbine accurately and in just a short time frame.

Enerpac's rugged multipurpose Enerpac hydraulic cylinders used on Port Botany container port expansion

02.12.2009 - Rugged multipurpose Enerpac hydraulic cylinders have proven effective in the concrete casting process at Sydney Ports Corporation’s Port Botany Container Terminal Expansion.

Enerpac’s programmable ZU4 Torque wrench pumps

02.12.2009 - New generation torque wrench pumps from Enerpac have been developed specifically for demanding and repetitive bolting applications in a broad range of industries.

New Enerpac hydraulic battery pumps

07.09.2009 - Powerful portable battery pumps are being introduced by Enerpac to drive labour-saving hydraulic tools and small to medium hydraulic cylinders on remote sites or wherever an electric cord or air hose gets in the way.

Enerpac production automation technology helps NZ’s Crightons

07.09.2009 - A New Zealand manufacturer that has gained major local and export orders for fencing components is using Enerpac production automation technology to help achieve the production efficiencies required.

New Enerpac integrated spreader

07.09.2009 - A powerful and highly portable hydraulic spreading tool is being introduced by Enerpac that generates 1360kg of lifting capacity from only 24kg of force applied to the handle of its integrated hand pump.

Enerpac News

Contact Enerpac